44
Displaying and Adjusting the Image
Adjusting the Image Shape
You can maintain a rectangular image by placing the projector directly
in front of the screen and keeping it level. This also produces the best
picture quality. If the projector is tilted up or down, the shape will
“keystone” and you may need to correct the image shape.
To correct keystone distortion, do one of the following:
■ Press the appropriate keystone correction button on the
projector’s control panel until the shape is evenly rectangular.
■ Select the
Keystone
setting in the projector’s
Settings
menu (see
page 61). Then use the arrow buttons on the remote control to
adjust the shape of the image.
Keystone correction
buttons
To Next Page
Loading...
Need help?
General