Maintaining the Projector
77
7. Replace the lamp cover, then tighten its screw.
8. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menu system.
1. Press the
Menu
button on the remote control or on the
projector’s control panel. You see the main menu.
2. Select the
Reset
menu and press
Enter
. You see this screen:
3. Select
Reset Lamp Hours
and press
Enter
.
4. When you see the prompt, select
Yes
and press
Enter
.
5. When you’re finished, press
Menu
to exit.
note
Tighten the lamp cover
securely so you do not receive
a lamp cover error when you
turn the projector back on.
To Next Page
Loading...
Need help?
General