Displaying and Adjusting the Image
45
Focusing and Zooming the Image
Turn the focus ring on the projector to sharpen the image:
To enlarge or reduce the image, turn the zoom ring:
If the image still isn’t large enough, you may need to move the
projector farther away from the screen.
You can also use the
E-Zoom
buttons on the remote control to zoom
in on a portion of the image. See page 51 for instructions.
Selecting the Color Mode
The Color Mode adjusts the brightness, contrast, and color for various
common viewing environments. Use this setting to quickly obtain a
good picture.
Press the
Color Mode
button on the remote control to select an
option. Press it until the option you want is projected in the upper
right corner.
Color Mode
button
To Next Page
Loading...
Need help?
General