Important Notice and Safety Instructions 10
❏ Avoid places subject to dust, shocks, vibrations, or cigarette smoke.
❏ Leave enough room around the product to allow for sufficient ventilation.
❏ Place the product near a wall outlet where the plug can be easily unplugged.
Using the Product
Observe the following when using the product:
❏ Do not insert objects in the product.
❏ Take care not to spill liquid on the product.
❏ Do not use aerosol products that contain flammable gases inside or around this
product. Doing so may cause fire.
❏ Always turn the product off using the P power button. When this button is pressed, the
power light flashes. Do not unplug the product or turn off the power to the outlet
until the power light stops flashing.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head
and may prevent the product from printing.
❏ Be careful not to trap your fingers when closing the disc cover.
❏ The product uses galvanized sheet metal, and this may cause rusting at the edges;
however, this does not cause any harm to the function of the product.
❏ Do not place any drink or liquid on the product as penetration by liquid inside the
product will cause a malfunction.
❏ Do not open disc cover while running a job (busy indicator is flashing), unless the
application instructs you to add or remove discs. This may affect write/read quality or
print quality. Also, for safety reasons, do not put your hands inside the product while
beeping, as arm is still moving.
❏ The product cannot be used as a shared printer using the Windows sharing setting.
Handling Ink Cartridges
Observe the following when handling the ink cartridges:
❏ Keep ink cartridges out of the reach of children. Do not allow children to drink from or
handle the cartridges.
To Next Page
Loading...
Need help?
General
