Epson PP-100II User Manual

Troubleshooting 108
Error associated with stacker
Disc transfer error
Turn off the product and remove the disc. If
the same error occurs frequently, contact
your dealer.
Arm failed to release disc
Turn off the product and remove disc.
Do not remove disc from the arm by hand if
arm is picking up the disc. This may damage
the arm. To remove the disc from the arm,
turn on the product again and let initializing
process remove the disc.
If the same error occurs frequently, contact
your dealer.
Internal error
Turn off the product and check inside for any
objects, then turn on the product again.
If the same error occurs frequently, contact
your dealer.
Do not remove disc from the arm by hand if
arm is picking up the disc. This may damage
the arm. To remove the disc from the arm,
turn on the product again and let initializing
process remove the disc.
Lights
Conditions/Remedies
Power Busy Error Ink
Stacker
1 2 3 4
Stacker 3 is inserted when stacker 3 is set to
Do not use in Standard mode, External Output
mode, or Read Back mode.
Remove stacker 3.
Stacker 1 is not correctly inserted
Make sure stacker 1 is correctly inserted.
Stacker 2 is not correctly inserted
Make sure stacker 2 is correctly inserted.
Lights
Conditions/Remedies
Power Busy Error Ink
Stacker
1 2 3 4

Epson PP-100II Specifications

General

Model	PP-100II
Category	Disc Duplicator
Disc Capacity	100 discs
Print Technology	Inkjet
Print Resolution	1440 x 720 dpi
Interface	USB 2.0
Weight	24 kg
Number of Drives	1
Dimensions	377‎ x 493 x 348 mm (Width x Depth x Height)
Writing Speed	CD: up to 40x, DVD: up to 12x
Operating System Compatibility	Windows XP, Vista, 7
Supported Disc Formats	CD-R, DVD-R, DVD+R