Epson PP-100II User Manual

Maintaining Your Product 97
Using the Head Cleaning Utility
Follow the steps below to clean the print head using the head cleaning utility.
1. Make sure the product is turned on.
2. Make sure no lights indicate errors and the disc cover is closed.
3. Access the printer driver.
See “Accessing the Printer Driver” on page 21.
4. Click the Utility tab; then click the Head Cleaning button.
5. Follow the on-screen instructions.
The Power light flashes while the product performs the cleaning cycle.
c
Caution:
Never turn off the product while the Power light is flashing. Doing so may damage the
product.
Note:
❏ If print quality has not improved after repeating this procedure about four times, turn the product
off and wait at least six hours. Then run the nozzle check again and repeat the head cleaning if
necessary.
❏ If the print quality still has not improved, at least one of your ink cartridges may be old or
damaged and may need to be replaced.
& See “Replacing an Ink Cartridge” on page 91.
<Normal> <Clogged>

Epson PP-100II Specifications

General

Model	PP-100II
Category	Disc Duplicator
Disc Capacity	100 discs
Print Technology	Inkjet
Print Resolution	1440 x 720 dpi
Interface	USB 2.0
Weight	24 kg
Number of Drives	1
Dimensions	377‎ x 493 x 348 mm (Width x Depth x Height)
Writing Speed	CD: up to 40x, DVD: up to 12x
Operating System Compatibility	Windows XP, Vista, 7
Supported Disc Formats	CD-R, DVD-R, DVD+R