Epson PP-100II User Manual

Using Your Software 19
Setting for Notification of Job Completion
A setting can be made to display a message on the screen or produce a beep to notify you
that a job (or jobs) is finished or the input stacker is empty.
Note:
This setting is reflected for all the CD/DVD/BD publishers registered.
1. Select Start ( in Windows 7 or Windows Vista) - All Programs (or Programs) -
EPSON Total Disc Maker - EPSON Total Disc Setup.
The EPSON Total Disc Setup will start.
2. Select Common Setting for Publishing from the Tool menu.
The Common Setting for Publishing screen will appear.
3. Click Notification Settings tab.
The Notification Settings screen will appear.
4. Select either one or both of the options for Notification Method.
5. Select either one of the options for Notification when a job is finished.
6. Click OK.

Epson PP-100II Specifications

General

Model	PP-100II
Category	Disc Duplicator
Disc Capacity	100 discs
Print Technology	Inkjet
Print Resolution	1440 x 720 dpi
Interface	USB 2.0
Weight	24 kg
Number of Drives	1
Dimensions	377‎ x 493 x 348 mm (Width x Depth x Height)
Writing Speed	CD: up to 40x, DVD: up to 12x
Operating System Compatibility	Windows XP, Vista, 7
Supported Disc Formats	CD-R, DVD-R, DVD+R