Product Information 133
Control Panel
Buttons
Lights
For details on error status, see the following instructions.
& See “Error Indicators” on page 106.
Button Function
Cleaning
Press and hold for 3 seconds to clean the print head.
Light Description
Power
On when the product is on.
Flashes when the product is initializing, after replacing an ink cartridge,
charging ink, or cleaning the print head.
Flashes when jobs are processed.
On when cover is open, or when errors on disc transfer, stacker, drive, or printer
occur.
Flashes when a problem occurs with the product.
INK
On when an ink cartridge has reached its replacement time or is not correctly
inserted.
Flashes when ink is low.
Flashes rapidly when the maintenance box has reached its replacement time
or is not correctly inserted.
STACKER
On when the stacker is overloaded with discs, or when stacker 3 is not removed
while stacker 3 is set to Do not use in Standard mode, External Output mode,
and Read Back mode.
Flashes when the stacker is not installed correctly or the stacker is out of discs.
When the stacker 4 light flashes rapidly, do not pull out stacker 4.
To Next Page
Loading...
Need help?
General
