Epson PP-100II User Manual

Maintaining Your Product 102
4. Use a vacuum-cleaner to clean the dust on the filters.
5. Place the filters back in position.
6. Tighten the screws to close the filter covers.
c
Caution:
Clean the filter periodically (once in every six months).
Getting Maintenance Information
You can get helpful information for maintenance and support of the product, such as the
cumulative number of printed discs, the free space of the maintenance box, and the service
life of the drives.
1. Make sure that the product is connected to the computer via the USB cable and that the
product is turned on.
2. Click Start ( in Windows 7 or Windows Vista), point to All Programs or Programs.
Point to EPSON Total Disc Maker, and then click EPSON Total Disc Setup.
3. Select CD/DVD/BD Publisher, and then click Properties.
4. Click the Maintenance Info tab.
Note:
When Service life of Drive1/Drive2 is close to 100%, it is time to replace it.

Epson PP-100II Specifications

General

Model	PP-100II
Category	Disc Duplicator
Disc Capacity	100 discs
Print Technology	Inkjet
Print Resolution	1440 x 720 dpi
Interface	USB 2.0
Weight	24 kg
Number of Drives	1
Dimensions	377‎ x 493 x 348 mm (Width x Depth x Height)
Writing Speed	CD: up to 40x, DVD: up to 12x
Operating System Compatibility	Windows XP, Vista, 7
Supported Disc Formats	CD-R, DVD-R, DVD+R