Publishing Discs 34
6. If you use stacker 3 for the following cases, insert stacker 3.
❏ When you select stacker 3 as the output stacker.
❏ When you select stacker 2 as the output stacker and you want to eject error discs to
stacker 3.
c
Caution:
❏ Make sure that there are no discs in stackers 3 and 4.
❏ Do not pull out stacker 4. Be sure to lock the lock lever located on stacker 4.
7. If you select stacker 4 as the output stacker, unlock the lock lever located on stacker 4.
To Next Page
Loading...
