Epson PP-100II - Page 42

Publishing Discs 42
3. Set Stacker Settings.
❏ Publish Mode: Select Standard mode.
❏ Stacker 1: Select the type of discs that you loaded into stacker 1.
❏ Stacker 3: If you want to eject published discs to stacker 2 and error discs to
stacker 3, select Use.
If you want to eject published discs to stacker 2 and error discs to
stacker 4, select Do not use.
If you want to eject published discs to stacker 3, select Use.
If you want to eject published discs to stacker 4, select Do not
use.
4. Click OK.