140
Scaling an Image
Adjusting the Lamp's Brightness
Blending the Image Edges
Adjusting the Black Level
Matching the Image Colors
Adjusting the Color Tone (Color Uniformity)
Adjusting the Color Convergence (Panel Alignment)
Configuring Tiling
Parent topic: Adjusting Projector Features
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
You can also match the colors displayed by any projectors you plan to use near each other.
Caution: Leave at least 20 inches (50 cm) of space between the projectors to prevent them from
overheating.
Setting the Projector ID
Setting the Remote Control ID
Parent topic: Using Multiple Projectors
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Multi-Projection setting and press Enter.
To Next Page
Loading...
Need help?
General
