Epson SC-F10000 Series User Manual

Item Parameter Explanation
Information Printing at Media Cut When the media is cut, information, such as the remaining amount of
media, is printed before and after the cut position. The information is
printed when, in the control panel, you press
and then press
Forward.
When Paper Remaining Information is set to On, the remaining amount
is printed on the unused side of the cut position. The following
information is printed. To print the paper remaining information, set
Manage Remaining Amount in Media Settings to On.
❏ Model: Model of the printer
❏ Serial No.: Serial number of the printer
❏ Print Date: Date and time of printing
❏ Bank No.: Media number when printing
❏ Media Type: Media Type registered to the media number when
printing
❏ Media Width: Automatically detected value of media width
❏ Remaining Amount: Remaining amount of media
When Print Information is set to On, the following information is printed
on the printed side of the cut position.
❏ Model: Model of the printer
❏ Serial No.: Serial number of the printer
❏ F/W Version: Firmware version of the printer
❏ Print Date: Date and time of printing
❏ Bank No.: Media setting number when printing
❏ Media Type: Media Type registered to the media setting number
when printing
❏ Media Width: Automatically detected value of media width
❏ Print Length: Amount of media used
Paper Remaining In‐
formation
On
Off
*
Print Information On
Off
*
Heater Off Timer
0 to 30 minutes (0
*
)
The heater turns off a specified time after printing during which no print
jobs are received. It turns back on if a print job is received or if you press
Preheat Start in the Home screen.
Inside Light
Auto
*
Select whether to turn on/off the light inside the front cover automatically
(Auto) or whether to use the panel button as necessary (Manual).
In Auto, the light turns on automatically when printing and so on, and
turns off when the operation is complete.
In Manual, you need to press
on the control panel to turn the light on/
off.
Manual
Clear Internal Memory Data Deletes all the data stored on the printer's internal memory and initializes
it.
Restore Default Set‐
tings
Network Settings
Executing Network Settings restores all the detailed settings in network
settings to their default setting values.
Executing Clear All Data and Settings restores all settings to their default
setting values.
Clear All Data and
Settings
Maintenance Setting
SC-F10000 Series User's Guide
Control Panel Menu
156

Epson SC-F10000 Series Specifications

General

Brand	Epson
Model	SC-F10000 Series
Category	Printer
Language	English