Epson SC-F10000 Series User Manual

C
Use a hex wrench to loosen the 3 screws on
anchor B, and then remove the screws and
anchor B.
D
Put the 2 top screws back into their original screw
holes, and use a hex wrench to tighten them
securely.
If they are tightened loosely, they may interfere
when closing the maintenance cover. Tighten
them securely.
E
Use a hex wrench to loosen and remove the 2
bottom screws on anchor A.
F
Use a hex wrench to halfway loosen the top screw
on anchor A.
G
Slide anchor A upward and then remove it.
SC-F10000 Series User's Guide
Appendix
185

Epson SC-F10000 Series Specifications

General

Brand	Epson
Model	SC-F10000 Series
Category	Printer
Language	English