During printing, the display switches, as seen in the illustration, and shows the following information and buttons.
(1) File name and preview of image being printed
(2) The Printed Length of media, Remaining Print Length of media, throughput (print length per hour),
throughput (print area per hour), or Time until media replacement
Pressing the display area while printing displays the screen to set the display details for (2). Select up
to 2 items that you want to display.
(3) Estimated time until completion
(4) Pause (Suspend) button
Appears as the Start button while warming up, until the heater reaches the set temperature. Pressing
this button starts printing, even if the heater temperature is low.
(5) Progress bar
Pauses printing
Pressing the Pause button while printing displays a screen for selecting the timing to suspend, press one to select
it.
❏ Immediate pause: Stops printing immediately.
❏ Pause between pages: Stops at the end of the page currently printing.
Pressing Resume in the screen during a pause cancels the pause status.
C Media info
Displays information about the media that is loaded. The number indicates the media setting number. When the
remaining amount of media goes below the value set in the Remaining Alert in the Media Settings menu,
appears. Press the display area to show the Media Settings menu.
U “Media Settings menu” on page 158
D Information on consumables
SC-F10000 Series User's Guide
Introduction
22
To Next Page
Loading...
Need help?
General