Epson SC-F10000 Series User Manual

* Maintenance Cleaning is head cleaning that the printer automatically does, after a set period of time has passed, to
keep the print heads in good condition. Set Maintenance Cleaning from the Maintenance Setting menu.
U “General Settings menu” on page 150
H Platen Gap
Displays the setting value for the platen gap. Pressing the display area shows the Settings screen.
Media Settings screen
List of main media settings that you can operate.
The Media Settings can also be changed from the Settings menu. Change to whichever is the easiest to use in your
situation.
U “Control Panel Menu” on page 140
A Dryer information
You can check the following operations and statuses regarding the dryer.
(1) Heater operations
You can change it On/Off and start preheating.
(2) Current
Displays icons and the Status Indicator screen at the same time, depending on the situation.
(3) Set
Pressing
/ allows you to change the values.
SC-F10000 Series User's Guide
Introduction
25

Epson SC-F10000 Series Specifications

General

Brand	Epson
Model	SC-F10000 Series
Category	Printer
Language	English