Settings item Setting/Additional Explanation
Advanced Paper Settings
Confirm ICC profile Displays the ICC profile name.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Confirm Color Density Displays the Color Density.
This is only displayed when the optional PS unit is connected and a custom paper
is set.
Paper Thickness 0.01 - 1.50 mm (0.01 mm units)/0.4 - 59.1 mil (0.1 mil units)
This item is only displayed for Custom Paper Setting.
Platen Gap Auto, 1.2, 1.6, 1.9, 2.1, 2.4
Select a wider setting if print results are scratched or smudged.
Top Margin 3 mm, 15 mm, 20 mm, 45 mm
If the margin at the leading edge of the paper is small, colors may be uneven
depending on the paper and printing environment. If this occurs, print a larger
margin at the leading edge of the paper.
Bottom Margin 3 mm, 15 mm
Margin Between Pages Standard, 6 mm, 30 mm, 65 mm
Paper Suction -4 - +3
Thin or soft paper may not be fed correctly. If this occurs, reduce the setting.
Back Tension Standard, High, Extra High
Adjust this when paper gets wrinkled during printing.
Drying Time Drying Time per Pass, Drying time per page
You can set the drying time for each print head movement (pass) or the drying
time for each page.
Paper Size Check Allows you to change settings after loading paper (before the paper is fed).
Auto Cut Follow Paper Source Settings, Never Cut
Skew Reduction On, Off
Select whether to enable (On) or disable (Off) paper skew reduction while printing
on roll paper.
Roll Core Diameter 2inch, 3inch
Set the paper core size for the roll paper being loaded.
Lateral Feed Adjustment On, Off
Set this to On to correct differences in the left or right of the paper feed.
Paper Eject Roller Auto, Use, Do Not Use
Paper Feed Offset -1.0 - +1.53%
This item is only displayed for custom paper.
Restore Default Settings The advanced paper settings are saved for the paper type. Select this when you
want to restore the default settings.
This is not displayed when Custom Paper is selected.
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
102