Settings item Setting/Additional Explanation
Remaining Amount Management
Remaining Amount Management On, Off
Remaining Amount Enter the amount of paper remaining.
Remaining Alert A warning is displayed when the amount of remaining roll paper is running low.
Enter the amount of remaining roll paper that will trigger the warning.
Change Paper Type You can change the set paper type.
Change Paper Type/Paper Width
Paper Type Recently Used Paper, Recently Registered Paper, More Paper Types (Photo Paper,
Proofing Paper, Fine Art Paper, Matte Paper, Campus Paper, Plain paper, Others,
Custom Paper)
Paper Width A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series, Others,
User-Defined
This item is only displayed when Custom Paper is set and Paper Size Check is
turned off.
Cut Sheet
Remove Ejects cut sheets.
After the paper is ejected, information on how to remove the cut sheets is
displayed.
Print Adjustments
Paper Feed Adjust Quality First, Length Accuracy First
Print Head Alignment Uni-D Alignment, Bi-D Alignment
You can adjust automatically or manually. Perform print head alignment when
the print results look grainy or out-of-focus. Normally, select Auto. If you are not
satisfied with the results of auto adjustment, perform manual adjustments. See
the following for details on the adjustment method.
U “Print Head Alignment” on page 118
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
103
To Next Page
Loading...
General