Epson SC-S70600 Series User Manual

c
Important:
If the right holder handle shaft is not visible,
rotate the handle forward until it stops. The
media can not be properly loaded if the handle
shaft is not visible.
D
Temporarily place media on the lifter oriented
according to how it is rolled (see below).
Printable Side Out
Printable Side In
Move the lifter so that the left edge of the media
matches the set position on the label.
Note:
If the label does not have the loading position, mark
it on the label as instructed in the Setup Guide.
U Setup Guide
E
Align the media and the roll holders.
Raise or lower the lifter until the media roll core is
level with the roll holders.
F
Fully insert the left roll holder. Next, tighten the
roll holder screw until the screw no longer turns
to fix the roll holder in place.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
58

Epson SC-S70600 Series Specifications

General

Brand	Epson
Model	SC-S70600 Series
Category	Printer
Language	English