Replacing Paper
52
Installing Flanges
A
Remove the new paper from its packaging, and stand it vertically on the flat surface. Next, wipe away paper
particles from the top of the paper with a damp cloth.
B
Set the Flange on the paper surface from which paper particles have been wiped away.
Place the paper straight to the Flange.
C
Position the paper so that the surface to which the Flange has not been set is face up.
Next, wipe away paper particies with a damp cloth.
Tip:
Either Flange can be set.
To Next Page
Loading...
Need help?
General
