Setup and Maintenance
91
B
Click Paper Settings (022) from Print Condition Settings/Inspections (02).
Item Explanation
Front Paper Type Displays the type of paper (the paper name) loaded in the front roll paper feeder.
Paper Surface
Type
Displays the paper surface type (the processing type for the paper surface) loaded in
the front roll paper feeder.
Paper Width Displays the width of the paper loaded in the front roll paper feeder.
Displays the width detected by the printer.
Paper Level Displays the remaining amount of paper loaded in the front roll paper feeder.
If the displayed amount of paper remaining differs from the actual amount, enter the
correct amount of paper and then click Apply.
Rear Paper Type Displays the type of paper (the paper name) loaded in the rear roll paper feeder.
Paper Surface
Type
Displays the paper surface type (the processing type for the paper surface) loaded in
the rear roll paper feeder.
Paper Width Displays the width of the paper loaded in the rear roll paper feeder.
Displays the width detected by the printer.
Paper Level Displays the remaining amount of paper loaded in the rear roll paper feeder.
If the displayed amount of paper remaining differs from the actual amount, enter the
correct amount of paper and then click Apply.
Back Click to close the Settings/Maintenance screen.
Help Click to display the Help.
Apply Click to apply any changed settings.
To Next Page
Loading...
Need help?
General
