12 Using EPSON Paper
Loading Envelopes
You can load up to 10 envelopes at a time:
1. Place the envelopes against the right edge of the sheet feeder. Load them with the
printable side facing you, flap-edge to the left. Then slide the left edge guide against the
envelopes.
Tip: For best results, press each envelope flat before loading it, or load one
envelope at a time.
2. Set the thickness lever on the right side of the printer to the ^ position for envelopes, as
shown. (Remember to return the thickness lever to the m position for sheet paper when
you’re done printing on the envelopes.)
3. Before you print, make sure you select these settings in your printer software:
■ For the Media Type, select Plain Paper
■ For the Paper Size, select the size of your envelopes
■ For the Orientation, select Landscape (in Macintosh OS X, click the icon)
See page 49 (Windows), page 54 (Macintosh OS 8.6 to 9.x), or page 56 (OS X) for more
information.
Load with the
printable side up
Set the thickness lever to
the envelope position
Pbasics.book Page 12 Wednesday, April 23, 2003 4:30 PM
To Next Page
Loading...
