32 Printing Without a Computer
One-Touch Printing
If there are certain settings you use quite often—for example, if you like to print 3.5 × 5-inch
snapshots on Premium Glossy Photo Paper using 4-inch rolls—you can create your own
custom settings and recall them at any time by pressing one of the
Custom buttons.
Follow these steps to create custom settings:
1. From the control panel, select any of the following settings you want to use:
2. Select which
Custom button (1 or 2) you want to program with your settings. Then press
and hold the button for at least three seconds, until you see a message saying that your
settings have been saved.
When you want to print, press the appropriate
Custom button (1 or 2) to recall your settings.
Make sure the correct paper is loaded, then press
Print.
Tip: If you like, you can further adjust any of the recalled settings after pressing
the Custom button (before printing); any additional changes you make affect only
the current print job and are not saved with your custom settings.
It’s a good idea to make a note of the settings you’ve programmed into each
button.
Standard settings Advanced settings
Print Mode Automatic Correction
Paper Type Enhancements
Paper Size Brightness
Layout Saturation
Quality Sharpness
Pbasics.book Page 32 Wednesday, April 23, 2003 4:30 PM
To Next Page
Loading...
