Selecting Photos for Printing 25
Selecting a Set of Photos
You can select two or more photos, then print them as a group
using a variety of layouts. If you’ve selected more photos than
can fit on a page, the printer automatically prints additional
pages as needed, using the same layout.
If you don’t have the optional preview monitor, first print an
index to identify the photos on the memory card (as described
on page 23).
1. Press the
Cancel button to clear any previous settings.
2. Highlight
Print Mode, then press the Select button.
3. In the Print Mode menu, highlight
Set then press . This is the option for printing
multiple photos.
Note: If you want to print all your photos, select All as the Print Mode.
4. Use the button to highlight Select Photo, then press .
5. Highlight
Select, press , then press again.
If you have the optional preview monitor, it displays the first photo on your card.
6. Use the and buttons to select the first photo you want to print, then press .
7. If you want to print more than one copy of this photo, use the button to highlight
Copies, then press .
Use the and buttons to select the desired number of copies, then press .
8. When you’re done selecting your first photo, use the button to highlight
Enter, then
press .
9. Repeat steps 5 through 8 for each additional photo you want to print.
Pbasics.book Page 25 Wednesday, April 23, 2003 4:30 PM
To Next Page
Loading...
