Epson Stylus Photo R220 - Page 65

EPSON Stylus Photo R220/R230 Revision A
DISASSEMBLY / ASSEMBLY Disassembly 65
 External View
Figure 2-26. Carriage Unit Removal (2)
8. Remove the E Ring, the Holder, Scale Right and the Cam, CR Right from the
right side of the CR Guide Shaft.
9. Remove the Fixed Spring, CR Shaft, Right from the tab of the Frame, Main.
Then, remove the Fixed Spring, CR Shaft, Right from the CR Guide Shaft.
10. Remove the E ring and the Flat Washer that secure the Holder, Scale Left.
11. Remove the E Ring, the Flat Washer and the Spring Washer from the left side
of the CR Guide Shaft. Then, remove the Holder, Scale Left.
12. Release the Cable, Head from the 4 tabs of the Holder, Shaft Assy.
13. Slide the CR Guide Shaft to the right and pull it out from the Cam, CR Left.
Then, remove the Carriage Unit and the CR Guide Shaft together.
14. Pull the CR Guide Shaft out of the Carriage Unit.
Holder, Scale, Left
E Ring
Flat Washer Spring
Washer
E Ring Flat
Washer
E Ring
Cam, CR Right
Fixed Spring,
CR Shaft, Right
Holder, Scale, Right
Tab
Cam, CR Left CR Guide Shaft
Tabs
CR Guide Shaft