Epson Stylus Photo RX600 - Page 104

104 Printing and Scanning Without a Computer
3. Make sure the memory card light (next to the card slots) is off and that no
cards are inserted. Then insert a card into the correct slot, as shown.
The memory card light flashes, then turns green.
Note:
If the card is not properly formatted, you see a message on the RX600 screen.
Press the button indicated on the RX600 screen to format the card. Any data stored
on the card will be erased.
4. Open the scanner lid.
CompactFlash or
Microdrive (bottom)
MemoryStick (middle)
SD or MMC (middle)
SmartMedia (top) xD (top)
Memory
card light
sprx600usersguide.book Page 104 Wednesday, February 25, 2004 1:47 PM