Printing Your Selected Photos 91
4. Use the u and d buttons to highlight
Resolution, then use
the l and r buttons to choose
Normal, Photo, or Best Photo.
5. If you want to adjust any other special print settings, see page 92 for
instructions.
6. When you’re done adjusting print settings, press the
OK button.
7. If you want to print multiple sets of your entire print job, press the u and d
buttons to choose a number of sets to print (1 to 99).
8. Press the x
Color button or x B&W button. Your print job begins printing.
Note:
To cancel a print job while printing, press the y Stop button.
Selecting the Correct Paper Type
When printing, be sure to select the correct Paper Type setting. This tells the
printer what kind of paper you’re using so it can adjust the ink coverage
accordingly.
Here are the settings you should choose using the Stylus Photo RX600 buttons
(when you’re not using your computer to print):
Loaded paper type Paper Type setting
Plain paper Plain
Epson Photo Paper
Epson Glossy Photo Paper
GlossyPhoto
Epson Premium Glossy Photo Paper Prem.Glossy
Epson Premium Semigloss Photo Paper
Epson Semigloss Scrapbook Photo Paper
Semigloss
Epson Premium Luster Photo Paper Prem.Luster
Epson Matte Paper Heavyweight
PremierArt Matte Scrapbook Photo Paper for
Epson
Matte
Epson ColorLife Photo Paper ColorLife
Epson Iron-On Transfer Paper Iron-on
Epson Glossy Photo Greeting Cards Greeting
sprx600usersguide.book Page 91 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
