Copying With a Computer 31
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
To copy a thick document, you can remove the scanner lid. Turn off
the RX600 and open the scanner lid completely. Disconnect the
cord from the TPU connector and pull the lid straight up. Turn on
the RX600 and gently press down the original to keep it flat on the
glass as you copy. When you’re finished, turn off the RX600
before replacing the scanner lid and plugging in the connector.
Loading Paper
1. Open the output tray.
2. Flip the feeder guard forward.
3. Press the sides of the left edge guide together and slide it all the way to the left.
Output tray
Feeder guard
sprx600usersguide.book Page 31 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
