26 Copying
Changing the Copy Layout
Your Stylus Photo RX600 offers you several layouts for copying.
1. Press the
Menu button to display the Copy Menu on the RX600 screen.
Note:
This menu is only available in Copy mode.
2. Choose Copy Layout with the u and d buttons and use the l and r buttons
to select one of the options in the table below.
3. After you choose your copy layout, press
OK.
Copy Layout settings
Copy Layout setting Result
Standard
Copies your original with a standard
0.12-inch (3 mm) margin
BorderFree*
Copies your original image to the
edges of 4 x 6-, 5 x 7-, or 8 x 10-inch
paper, slightly enlarging it as
necessary**
Small Margins
Copies your original with a
0.06-inch (1.5 mm) border
around the edges
sprx600usersguide.book Page 26 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
