Epson Stylus Photo RX600 - Printing from Film or Slides

Printing from Film or Slides 97
Printing from Film or Slides
You can use the film holder that came with the RX600 to scan and print from
35 mm slides or strips of negative or positive film, without using a computer.
Removing the Film Holder and Document Mat
1. Open the scanner lid and slide out the document mat. Set the mat aside so
you can reinstall it for scanning reflective documents later.
Note:
You can’t scan film or slides unless the white document mat is removed from the
scanner lid.
2. Remove the film holder from its storage place. (Remember to replace the film
holder when you’re done using it.)
sprx600usersguide.book Page 97 Wednesday, February 25, 2004 1:47 PM