Epson Stylus Photo RX600 - Copying With a Computer

30 Copying
Copying With a Computer
Follow these steps to use EPSON Smart Panel to copy with your computer.
Note: Some features, such as PhotoEnhance
TM
and Sepia, are only available when
copying from the computer.
Placing Your Document or Photo
1. Press the P On button to turn on the Stylus Photo RX600.
2. Open the scanner lid.
3. Place your photo or document face down on the glass in the upper left corner
about 1/10 inch from the edges, as shown.
4. Close the scanner lid.
0.1 in
0.1 in
Move the photo or
document in about
1/10 inch from the
edges
sprx600usersguide.book Page 30 Wednesday, February 25, 2004 1:47 PM