Epson Stylus Photo RX600 - Scanning to E-Mail

80 Scanning to a Computer
9. When you see the File Save Settings window, type a name for your file in the
Prefix box, select a file format in the Type box, and click
OK.
10. Follow the instructions in “Scanning to a File” on page 59 to complete the
scan.
Scanning to E-Mail
This section explains how to use the RX600 buttons to launch Epson Smart Panel.
You can also scan to e-mail by double-clicking the
EPSON Smart Panel icon on
your desktop and clicking the
Scan to E-mail button. See your Smart Panel
online help for details.
1. Make sure the Stylus Photo RX600 is connected to your computer.
2. Open the scanner lid.
3. Place your photo face down on the glass in the upper left corner about
1/10 inch from the edges, as shown.
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be scanned.
0.1 in
0.1 in
Move the photo in
about 1/10 inch
from the edges
sprx600usersguide.book Page 80 Wednesday, February 25, 2004 1:47 PM