EasyManua.ls Logo

Epson Stylus Photo RX600 - Selecting a Range of Photos

Epson Stylus Photo RX600
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88 Printing and Scanning Without a Computer
5. Use the l and r buttons to navigate to the photo you want to print, then
use the u and d buttons to choose the number of copies for that photo.
6. Repeat step 4 for each photo you want to print, then press the
OK button.
7. Continue with “Printing Your Selected Photos” on page 90 to finish laying
out your photos and setting up your print job.
Note:
If you selected the wrong photo, you can deselect it from the list of selected
photos by changing its number of copies to zero as described in step 5.
Selecting a Range of Photos
You can select a range of photos to print (such as photos 1 through 5) and print
them as a group.
1. Press the
Memory Card button.
2. Use the u and d buttons to highlight
Custom Print.
3. Use the l and r buttons to choose
Range Print.
4. Press the OK button.
5. Use the l and r buttons to choose the first photo in the range.
6. Press the
OK button.
7. Use the l and r buttons to choose the last photo in the range.
8. Press the
OK button.
9. Continue with “Printing Your Selected Photos” on page 90 to finish laying
out your photos and setting up your print job.
sprx600usersguide.book Page 88 Wednesday, February 25, 2004 1:47 PM

Table of Contents

Other manuals for Epson Stylus Photo RX600

Related product manuals