76 Scanning to a Computer
2. Place slides in the film holder as shown, with the duller (emulsion) side
facing up.
Note:
If your slide image is in landscape orientation (wider than it is long), place it in the
same direction as slide images in portrait orientation (longer than they are wide).
This copies the maximum image area, but your preview will be rotated.
3. Close the scanner lid.
4. Continue with the steps in the next section to scan your slides.
Make sure the top of
images with portrait
orientation face the
front of the RX600
sprx600usersguide.book Page 76 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
