103
Replacing the Head Cleaning Set
If you notice any of the following, you need to replace the head cleaning set:
• Your printouts are faint or smudged.
• Segments are missing even after cleaning the print head.
1. Use the left or right arrow button to select the tab and press the OK button
The Maintenance menu is displayed.
2. Use the up or down arrow button to select Head Cap Cleaning and press the OK button.
The print head moves to the cleaning position.
3. Before you replace the head cleaning set, move the print heads into maintenance position.
4. Follow the on-screen instructions to open the maintenance cover.
To Next Page
Loading...
