64
Soft cloth
Obtain a commercially available static-free, lint-free soft cloth to clean inside the product.
Parent topic: Preparing for Maintenance
Related references
Consumables and Replacement Parts
Maintenance Precautions
Follow these precautions as you maintain your product:
• Remove loaded media from the product before performing any maintenance tasks.
• Touch a metal object to discharge any static electricity before performing any maintenance tasks.
• Never touch the belts, cables, circuit boards, or other parts not covered in the maintenance task steps
or you could adversely affect the print quality or damage your product.
• Use only the cleaning sticks included in the product maintenance kit to clean your product to avoid
damaging the print head.
• Do not reuse cleaning sticks.
• Do not touch the ends of the cleaning sticks to prevent oil from your hands from damaging the print
head.
• Use only the cap cleaning liquid specified to clean the caps. Using anything else could damage your
product or reduce print quality.
• Do not use alcohol or water to clean the nozzle surface, caps, or wiper or you may damage your
product.
• Store ink packs, waste ink, and ink cleaner out of the reach of children.
• Wear protective eyewear, gloves, and a mask when performing maintenance tasks.
• Wash your hands after performing maintenance.
• Always use fresh cleaning pads.
Warning: If ink, waste ink or ink cleaner contact your skin, or get into your eyes or mouth, immediately
do the following:
• Thoroughly wash the substance from your skin with large volumes of soapy water. If your skin
becomes irritated or discolored, contact a doctor.
• Immediately rinse the substance from your eyes with water to avoid bloodshot eyes or mild
inflammation. If you experience eye problems, contact a doctor.
To Next Page
Loading...
