39
Parent topic: Media Handling
Using the Auto Take-up Reel
See these sections to use the auto take-up reel with your product.
Note: The auto take-up reel may not be available in all markets.
About the Auto Take-up Reel
Attaching the Take-up Roll Core to the Auto Take-up Reel
Take Up with the Printable Side In
Removing Media from the Auto Take-up Reel
Parent topic: Media Handling
About the Auto Take-up Reel
The auto take-up reel automatically rolls up printed media as you print.
It is best to do the following when using the auto take-up reel:
• Load media with the printable side in.
• Use a take-up roll core that is the same width as your media so the core does not bend or take up
media incorrectly.
• Do not attach take-up roll cores with worn or deformed edges. The media may not wind correctly,
causing banding in the print results.
• Use any commercially available tape to attach your media to the roll core.
Parent topic: Using the Auto Take-up Reel
Attaching the Take-up Roll Core to the Auto Take-up Reel
Be sure to attach a take-up roll core that is the same width as your media.
To Next Page
Loading...
