97
5. If any paper dust accumulates in the platen holes, gently remove it using a pointed object.
6. Close the printer cover.
7. Plug in and turn on the product, then load roll paper.
8. To clean the pressure rollers, press the cut/feed media button, then hold down the down
arrow button to feed paper over the rollers.
9. Cut the media after feeding.
Parent topic: Maintenance
Related references
Maintenance Precautions
Related tasks
Cutting Media
Removing Media
Replacing the Waste Ink Bottle
When you see one of these messages on the product control panel screen, you need to replace the
waste ink bottle:
• Prepare empty waste ink bottle
• Replace waste ink bottle and press OK
Wait until the product is not printing or cleaning the print head before replacing the waste ink bottle.
To Next Page
Loading...
