36
1. Press the cut/feed media button, look through the printer cover, and press the down arrow
button as necessary to align the cut position with the arrow inside the printer.
2. Press the OK button.
The printer slowly cuts the media.
Parent topic: Media Handling
Related references
Setup Menu Settings
Removing Media
After printing, remove the roll paper from your product for the best results.
Caution: Always remove media after printing. This avoids creases in the media that may be caused by
the pressure rollers. Creased, wavy, or curled media could cause it to jam inside the printer or contact
the print head.
1. Press the load/remove paper button.
The Load/Remove Paper menu appears on the product control panel screen.
To Next Page
Loading...
