115
• Make sure the USB cable length does not exceed 10 feet (3 m).
Parent topic: Solving Printing Problems
Related references
Interface Specifications
Cannot Print Over a Network
If you cannot print over a network, try these solutions:
• Make sure that your printer is turned on.
• If you are using TCP/IP, make sure the printer's IP address is set correctly for your network. If your
network does not assign IP addresses using DHCP, set the IP address manually.
• Check your wired LAN router or access point to see if the LED for the port to which your printer is
connected is on or flashing. If the link LED is off, try the following:
• Make sure the Ethernet cable is securely connected to your printer and to your router, access point,
switch, or hub.
• Try connecting your printer to a different port or a different router, access point, switch, or hub.
• Try connecting with a different Ethernet cable.
• Try printing to your printer from another computer on the network.
Parent topic: Solving Printing Problems
Related references
Setup Menu Settings
Print Head Moves But Nothing Prints
If the print head is moving and nothing prints, try these solutions:
• Print a nozzle check pattern. If the pattern does not print correctly, clean the print head again. (If the
printer has not been used for a long time the nozzles may be clogged.)
• If you see the message Motor Self Adjustment on the product control panel screen, the printer is
adjusting its internal motor. Wait a few moments for the message to disappear and do not turn off the
printer.
Parent topic: Solving Printing Problems
Related tasks
Cleaning the Print Head
Checking for Clogged Print Head Nozzles
To Next Page
Loading...
