86
9. If the product control panel displays C1, press the up or down arrow button to select the number of
the best pattern in C1 and press the OK button. Repeat this step for all the color patterns.
After you select the final color pattern number, the control panel returns to its ready status.
Parent topic: Print Head Maintenance
Related references
Maintenance Menu Settings
Related tasks
Loading Media
Checking for Clogged Print Head Nozzles
Performing Head Maintenance
If ink smears onto your printed media even after cleaning the print head, you should perform head
maintenance to clean inside the product near the print head.
Use the head maintenance kit that came with your product to perform head maintenance.
1. Remove any paper loaded in the product.
2. Press the left or right arrow on the product control panel to highlight the tab and press the OK
button.
You see the Maintenance menu on the product control panel screen.
3. Select Head Maintenance and press the OK button.
You see a message asking you to prepare the head maintenance kit.
4. Press the up or down arrow button to select Yes then press the OK button.
The product moves the print head out of the way.
To Next Page
Loading...
