30
5. If you turned on the Remaining Setup setting, you see a prompt to enter the length of the current
media.
6. Press the up or down arrow button to select a roll length from 15 to 3000 feet (5 to 999.5 m) long and
press the OK button.
Note: You can select the roll length in 19.7 inch (0.5 m) increments.
After a moment you see the message Ready on the product control panel indicating that it is ready
to print.
Parent topic: Media Handling
Related tasks
Saving Sets of Media Settings
Saving Sets of Media Settings
You can store sets of media settings for each type of media you use. This lets you quickly select all the
necessary settings whenever you print on that media type.
The media settings include the options selected and stored for each media bank or RIP setting you
created.
Note: Make sure that you loaded the media type for which you are selecting settings.
1. On the product control panel, press the left or right arrow button to select the tab and press the
OK button.
The Paper menu appears.
2. Press the up or down arrow button to select Custom Paper Setting and press the OK button.
The Custom Paper Setting menu appears.
3. Press the up or down arrow button to select a number for the set of media settings (from 1 to 10) and
press the OK button.
4. To select a reference media type that is close to the characteristics of the media you are adding,
select Select Reference Paper and press the OK button.
5. Press the up or down arrow button to select Yes and press the OK button.
6. Press the up or down arrow button to select the reference media thickness and press the OK button.
7. Press the back button to return to the paper settings menu.
To Next Page
Loading...
