Epson SureColor F6370 - Page 84

84
2. Press the up or down button to select Custom Paper Setting and press the OK button.
3. Press the up or down button to select the paper type you want to set alignment values for and press
the OK button.
4. Press the up or down arrow button to select Head Alignment and press the OK button.
5. Press the up or down arrow button to select one of these adjustment methods and press the OK
button:
• If you are printing bidirectionally on your media, select the Manual(Bi-D) setting. If the print quality
has not improved, repeat the steps here and select the Manual(Uni-D) setting.
• If you are printing unidirectionally on your media, select the Manual(Uni-D) setting.
6. Press the OK button to print an alignment test pattern.
Note: When paper is loaded in the auto take-up reel, the paper is not automatically cut after printing
the alignment pattern. If the alignment pattern is hard to see, press the cut/feed media button
then press the down arrow button until the alignment pattern is easily visible. After checking the
printed pattern, press the up arrow button to rewind the paper then press the back button to return
to the menu.