Epson TM-C7500G series

140
Error notification setting for [Not use EPSON Status Monitor 3]
Follow the steps below to set error notification for [Not use EPSON Status Monitor 3].
1
Turn the printer on.
2
Display the printer driver window.
See "How to Display the Printer Driver" on page 78
3
Select [Driver Utilities] tab and click [Driver Preferences].
When EPSON Status Monitor 3 is enabled, [Notification Setting s for Fatal Errors] is not dis-
played. (Disable "Use/ Not use EPSON Status Monitor 3" on page 137.)
4
The [Notification Settings for Fatal Errors] window is displayed. Select the
items you want to display when an error occurs, and click [OK].
 Ambient Temperature Error: When the printer temperature is high 
(Default: Screen Notification [On])
 Service Required: When a no-print error or service-required error occurs 
(Default: Screen Notification [On])
 Nozzle Clogged Warning:When the nozzle is clogged
(Default: Screen Noti
fication [On])