Epson TM-C7500G series

141
Chapter 3 Handling
3
Error notification setting for [Use EPSON Status Monitor 3]
Follow the steps below to set error notification for [Use EPSON Status Monitor 3].
1
Turn the printer ON.
2
Display the printer driver window.
See "How to Display the Printer Driver" on page 78
3
Select [Driver Utilities] tab and click [Monitoring Preferences].
When EPSON Status Monitor 3 is disabled, the [Monitoring Preferences] is not displayed.
(Enable EPSON Status Monitor 3 by referring to "Use/ Not use EPSON Status Monitor 3" on
page 137.)
4
The [Monitoring Preferences] window is displayed. Click on the box of your
choice, and click [OK].
 Error: When paper/ink replacement is required
(Default: Screen Notification [On])
 Communication Error: When the printer power is off
(Default: Screen Notification [Off])
 Ink Low: When the ink amount is low
(Default: Screen Notification [Off])
 Service Required: When a print
er error occurs
(Default: Screen Notification [On])
 Nozzle Clogged Warning:When a Nozzle clogged
(Default: Screen Notification [On])