182
Full-page label(Black mark)
Media type Plain label / Matte label / Synthetic label / Glossy label
Media source Roll paper
Backing paper width 50 mm to 112 mm {1.97 to 4.41"}
Label width 46 to 108 mm {1.81 to 4.25"}
Right and left outer edges 2 0.5 mm {0.08 0.020"}
Black mark width 28 mm {1.10"} or more from paper edge
Black mark length 5 mm {0.20"} or more
Black mark position Right edge of back of paper, when feed edge is at top
Gaps between black marks 25.4 to 603 mm {1 to 23.74"}
Paper thickness Plain label/ matte label/ synthetic label:
0.129 to 0.236 mm {0.005 to 0.009"} (reference values)
Glossy label:
0.167 to 0.182 mm {0.007 to 0.007"} (reference values)
Paper core Internal diameter: 76.2 0.5 mm {3 0.020"}
External diameter: 82.2 mm {3.24"} or more
External diameter Maximum 203.2 mm {8"}
Winding direction Printing face must be facing outside.
Do not use the paper with a hole or cutout.
To prevent glue from sticking to the roll paper supply unit, use label paper whose outer
edges are removed only on the right and left.
Label area
Backing paper
Backing paper width
Label width
Edge cutoff
Edge cutoff
To Next Page
Loading...
Need help?
General
