Epson TM-C7500G series User Manual

60
13
Close the paper hold.
CAUTION
When you close the paper hold, a gap of about 0.5 mm will automatically occur between the
guide panel of the paper guide (b) and the edge of the paper. Paper will be fed properly with
this gap.
After closing the paper hold, check if there is a gap between the guide panel and the edge of
the paper. If there is no gap, it might cause misaligned printing or paper jams. Return to step 8.
Paper Hold
(0.02")
0.5mm
Edge of the paper
Guide panel (paper guide (b))
Gap

Epson TM-C7500G series Specifications

General

Print Technology	Inkjet
Ink Type	Pigment-based ink
Connectivity	USB, Ethernet
Operating Systems Supported	Windows, macOS
Media Handling	Roll-fed
Ink Cartridge	Individual CMYK cartridges
Cutter	Auto cutter
Print Speed	Up to 11.8 inches/sec (300 mm/sec) at 360 x 360 dpi