51
Chapter 3 Advanced Usage
3
Amount of top margin by backfeed
• 2.0mm (initial settings)
• 9.5mm (no backfeed) (initial settings)
Interface switch waiting time
Select from 1 to 10 seconds (in intervals of 1 second)
1 second (initial setting)
Main connection interface
• Auto (interface that receives data first) (initial setting)
• USB
• Bluetooth
• Ethernet/Wi-Fi
• No main connection I/F
LED indicator when I/F starting
• Enabled (initial setting)
• Disabled
• Remove all ejected paper before printing with backfeed.
• Disable the automatic top logo setting when enabling backfeed.
• Backfeed is not performed during the self-test, even if you have enabled backfeed.
• If setting a top margin of 5 mm {0.2"} or less, confirm that no errors occur in your environment of
usage. Usage in a hot and humid environment or usage of paper that curls easily may increase
the risk of paper jams.
• When implementing a backfeed, rubbing smears may occur due to slack in the paper. We
recommend using thermal paper with high rub resistance.
• You can specify values in 0.5mm steps if you use TM-m30 Utility or TM Utility for iOS/Android.
• When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
• When using multiple interfaces, set the receive buffer capacity to 4 KB.
• You cannot use wired LAN and wireless LAN at the same time.
• When not using Bluetooth, set the Bluetooth security level to Middle or High in order to prevent
third parties from unauthorized pairing.
You can change the security level with Epson TM Utility, TM-m30 Utility, or the Interface Setup
mode.
• The displayed items vary depending on the interface configuration.
• For information about the function, see
"Printing Using Multiple Interfaces" on page 25.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
