EasyManuals Logo

Epson tm-m30 Technical Reference Guide

Epson tm-m30
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
54
Buzzer frequency (Pulse 1)
Does not sound
Sounds 1 time (initial setting)
Sound pattern (Pulse 2)
Selectable from Patterns A to E
Initial setting: Pattern B
Buzzer frequency (Pulse 2)
Does not sound
Sounds 1 time (initial setting)
Communication condition of USB interface
Class
USB printer class (initial setting)
USB vendor-defined class
Communication condition of Bluetooth interface
Device name (initial setting: TM-m30_xxxxxx)
Passkey (initial setting: 0000)
Security (initial setting: Low)
Auto Re-Connect with iOS device (initial setting: Enabled)
Bluetooth communication interval during power saving mode
Level 1 (Standard) (Initial setting)
Level 2 (Short)
The device name is initially set to TM-m30_xxxxxx.
(xxxxxx refers to the last 6 digits of the serial number labeled on the back of your printer.)
By changing the setting to "Level 2 (Short)," you can shorten the time until printing begins or the
time until information is shown on the customer display connected to the printer.
However, because the communication frequency increases, the power consumption of the printer
and the host also increases.
Also, depending on the host, this setting may not be enabled, and the host-specified
communication interval may be used.

Table of Contents

Other manuals for Epson tm-m30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson tm-m30 and is the answer not in the manual?

Epson tm-m30 Specifications

General IconGeneral
TypePOS printer
Print technologyThermal
Maximum resolution203 x 203 DPI
BluetoothYes
USB connectorUSB Type-A / USB Type-B
Standard interfacesBluetooth, Ethernet, NFC, USB
USB 2.0 ports quantity2
Connectivity technologyWired & Wireless
Ethernet LAN (RJ-45) ports1
Country of originChina
Autocutter durability1.5 million cuts
Sound pressure level (printing)55 dB
Mean time between failures (MTBF)360000 h
Product colorWhite
Power supply typeAC
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
Supported paper width58 - 80 mm
Storage temperature (T-T)5 - 45 °C
Operating temperature (T-T)10 - 90 °C
Storage relative humidity (H-H)-20 - 60 %
Operating relative humidity (H-H)10 - 90 %
Package depth235 mm
Package width190 mm
Package height230 mm
Package weight2040 g
Quantity per pack1 pc(s)
Pallet width800 mm
Pallet height2070 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pallet128 pc(s)
Quantity per pallet (UK)192 pc(s)
Quantity per pallet layer16 pc(s)
Quantity per pallet layer (UK)24 pc(s)
Weight and Dimensions IconWeight and Dimensions
Width127 mm

Related product manuals