J
Return to the Software Installer screen and select the assigned port for the printer driver on the screen, and then
click the Next button.
K
The Start Installation screen appears. The driver and utility to be installed are listed.
Click the Install button to start the installation.
L
When the installation is completed, the Installation Finished screen appears.
When conducting test print
Click the Printing Test button. When the test print is finished, click
the Finish button to end the installation.
When exiting the installation
Uncheck the Run TM-P20 Utility. Then click the Finish button to
end the installation.
When setting the printer using TM-P20 Utility
continuously
Check the Run TM-P20 Utility checkbox (the box is checked by
default). Click the Finish button to end the installation. The
TM-P20 Utility starts to run.
U See “TM-P20 Utility” on page 61
TM-P20 Software Installer Software User's Manual
Installation
27